Setup And Use - Biamp Tesira HD-1 Operación Manual

Setup and Use

1. Volume up and down
2. Mute
3. LCD display
4. Context buttons
5. Scroll up and down
6. Select
7. Numeric keypad
8. Conference
The Tesira software provides an intuitive interface for setup and programming of the HD-1. The
information supplied by this manual relates to physical connections and device setup. For more details on
software setup, please consult the Tesira Help File.
One HD-1 can be associated to a single VoIP or POTS telephone line available on a Tesira system. This
provides all standard telephony functions, including dialing, the ability to answer and make calls, mute,
conference and redial.
Installation
Install the unit away from heat sources, such as vents and radiators, and in rooms with adequate
ventilation. Ensure that air can circulate freely behind, beside, and above the unit. Do not exceed the
maximum ambient operating temperature of 32°-113° F (0° - 42°C).
Default Network configuration.
The HD-1 by default uses a Link local (Auto) IP address. This allows the device to receive its network
configuration from a DHCP server. This enables the HD-1 to be discovered by a Tesira SERVER-IO,
SERVER or TesiraFORTÉ device that also has default IP settings. The default HD-1 hostname is "HD-1-"
followed by its serial number. The network settings and Hostname can be edited and assigned via Device
Maintenance in the Tesira software.
Tesira software Version 2.4 or later provides programming of all remote functions, network setup, device
naming, and device maintenance.
Tesira HD-1 Setup and Installation
9. Call appearance one
10. Call appearance two
11. Hold
12. Off hook
13. On hook
14. Last number redial
15. Speed dial
16. Flash