Biamp Tesira HD-1 Operación Manual página 4

Tesira HD-1 Rear
Rear Connector
One Ethernet port is provided for connecting the HD-1 to the network. The Network connector should be
wired using shielded CAT5, 5e, 6 or 7 cabling to interface to a Tesira system.
This connection is made to the Ethernet port of a Tesira SERVER-IO, SERVER or TesiraFORTÉ device,
either directly (single station) or via a network switch, and carries control data over Ethernet.
PoE-enabled network switches or PoE midspan adapters must be used to power the unit. These must be
802.3at Type 1 compliant. The maximum cable distance between any unit and an Ethernet switch is 328
feet (100 meters) when using copper cabling. Additional Ethernet switches and/or fiber-optic cable can be
used to further extend distances between units on a network.
Visit www.biamp.com to obtain firmware and software updates related to this product. To speak with an
Applications Engineer, please call 1.503.641.7287 or email support@biamp.com .