Helo HIMALAYA Elite Instrucciones Rápidas Para El Uso página 15

Sauna heater safety clearances
Table Safety clearances
Corner and wall installations: The OLET 31 sensor is installed 40 mm from the ceiling on the centre line of the heater on a
wall. Alternatively, the sensor can be installed on the ceiling above the centre of the heater – see 'middle installation' for
instructions. The heater must be secured to the floor or the sauna bench structure in order to keep the safety distances the
same.
OLET 31
Wall support
Heater mounting
point to wall or sau-
na bench
Middle installation: If the sauna heater is installed further than 60 mm off a wall or a corner, the installation method is always
middle installation. The heater must be attached to the benches or to a similar structure using a wall support. The OLET 31
sensor is always installed on the ceiling.
A
Output Sauna room
Volume
min. max.
kW m³ m³
6.8 5 9
10.5 9 15
mm
F
870
A
H
1900
Wall support
Heater mounting
point to wall or sauna
bench
Heater minimum clearances
Height From
side to
wall From front to
sauna bench
A
min. mm mm
1900 60
1900 60
OLET 31
Wall support
Heater mounting
point to wall or sau-
na bench
Amount of stones
To
ceiling
D
mm
mm In kg, approx.
60 870
60 870
Absolute measure,
when the sensor
OLET 31 installed on
the wall.
Water tank
330
OLET 31 sensor posi-
tion in a ceiling installa-
tion above the heater
within the 330 mm
diameter.
4
100
100