Publicidad
en_us | 50 | T10224
2 General Safety Instructions
WARNING
Read and follow all safety notes and instructions!
Failure to follow the safety instructions may result in
serious injuries and material damage.
Observe and follow the safety notes below.
The load holding device has been specifically
constructed for its intended use. The safety of the
load holding device can no longer be ensured if it is
misused or modified in ways not expressly approved
by the manufacturer. Serious injuries or damage to
property can occur.
Ensure that each person using the load holding
device is familiar with these instructions and can
access them at all times.
Carefully read and adhere to the instructions in the
technical safety information of the Volkswagen
Group brands.
Wear safety shoes (according to ISO 20345, S2).
Wear protective gloves in order to avoid cuts.
Position hands and feet carefully to avoid potential
crushing hazards.
Ensure that all users are also familiar with the
operating manuals of all tools and workshop
equipment, which are necessary for the work.
Use the load holding device only for work approved
by the Volkswagen Group.
Use the load holding device only with the
accessories approved by the Volkswagen Group.
Do not exceed the maximum load capacity of
365 kg.
2018-05-24
Use only the engine support for engine and gearbox
units in accordance with the workshop manuals of
the Volkswagen Group brands.
Tighten the screw connections with the prescribed
torque (see workshop manuals of the Volkswagen
Group brands).
Use only in connection with a suitable engine and
gearbox lifter (e.g. VAS 6931/VAG 1383A) (see
workshop manuals of the Volkswagen Group
brands).
The engine and gearbox jack may only be operated
by one person.
The positioning of persons under the load and in the
dangerous area is prohibited during the movement
process.
Move the load slowly and carefully.
Observe the engine support and the load during all
movements.
Only move the load on the lowest setting.
Ensure that the track is clear and easily visible.
Do not work on suspended loads.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Publicidad
Capítulos
