Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips truss-head screws • E) (4) #8 x 3/8" Phillips pan-head screws
A
B
Metra. The World's Best Kits.
®
Hyundai Santa Fe
Hyundai Santa Fe Sport
*Visit MetraOnline.com for up-to-date vehicle specific applications.
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted matte black
C
D
MetraOnline.com
2013-2016
2013-up*
E
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-7354B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 5/1/18 INST99-7354B
Publicidad
Manuales relacionados para Metra 99-7354B
Resumen de contenidos para Metra 99-7354B
- Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/1/18 INST99-7354B...
- Página 2 DASH DISASSEMBLY 1. Unclip and remove the A/C vents from the left and right side of the factory radio. (Figure A) 2. Remove (4) Phillips screws securing the radio. Slide the radio out, then unplug and remove the radio. (Figure B) Continue to Kit Assembly (Figure A) (Figure B)
- Página 3 (Figure B) 4. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation . (Figure A) (Figure B) 5.
- Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/1/18 INST99-7354B...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/1/18 INST99-7354B...
- Página 6 DESMONTAJE DEL TABLERO 1. Desenganche y quite las rejillas del aire acondicionado del lado izquierdo y derecho del radio de fábrica. (Figura A) 2. Quite los (4) tornillos Phillips que sujetan el radio. Deslice la radio, luego desenchufe y quite la radio. (Figura B) Continúe con Ensamble del Kit (Figura A) (Figura B)
- Página 7 (Figura A) (Figura B) Metra recomienda que use adaptadores adecuados de acoplamiento de Metra o de AXXESS. Pruebe el radio y controles de clima para verificar que funcione correctamente. 5. Vuelva a armar el tablero al revés de como lo desarmó.
- Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/1/18 INST99-7354B...