Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-7353B
Kia Rio, Rio5 2012-up
KIT FEATURES
• ISO DIN head unit provision with pocket
• Painted Matte Black
KIT COMPONENTS
• A) Radio Housing Trim Panel • B) Radio Brackets • C) Start/Stop Switch Blank Plate) • D) Pocket
• E) (2) #8 x 3/8" Phillips Pan-Head Screws • F) (2) #8 x 3/8" Phillips Truss-Head Screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304 2010-Up Hyundai/Kia Wire Harness
Antenna Adapter: • Not Required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket Wrench
METRA. The World's best kits.
APPLICATIONS
99-7353B
D
C
™
1-800-221-0932
Dash Disassembly
– Kia Rio, Rio5 2012-up .......................................... 2
Kit Preparation ....................................................... 3
Kit Assembly
– ISO DIN head unit provision with pocket ............... 3
E
F
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
Table of Contents
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-7353B
Resumen de contenidos para Metra 99-7353B
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-7353B APPLICATIONS Table of Contents Kia Rio, Rio5 2012-up 99-7353B Dash Disassembly – Kia Rio, Rio5 2012-up .......... 2 Kit Preparation ............3 Kit Assembly KIT FEATURES • ISO DIN head unit provision with pocket – ISO DIN head unit provision with pocket ....3 •...
- Página 2 99-7353B Dash Disassembly 1. Unclip and remove the factory 5. Remove the (8) Phillips screws radio trim panel including the a/c securing the a/c vents then unclip vents. (Figure A) and remove them from the radio trim panel. (Figure B) 2.
- Página 3 (Figure B) 3. Locate the factory wiring harness (Figure A) in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
- Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits. ™ 1-800-221-0932 metraonline.com © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...
- Página 5 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7353B AplicAciones Indice Kia Rio, Rio5 2012 y mas 99-7353B Desmontaje del tablero – Kia Rio, Rio5 2012 y mas ........2 Preparación del kit ..........3 Ensamble del kit cArActerísticAs del kit – Provisiones de unidad central ISO DIN con bolsillo ... 3 •...
- Página 6 99-7353B Desmontaje del tablero 1. Desenganche y quite el panel de la 5. Quite los (8) tornillos Phillips moldura del radio de fábrica, incluyendo que sujetan las rejillas del aire las rejillas del aire acondicionado. acondicionado y luego desengánchelos (Figura A) y quítelos del panel de la moldura del...
- Página 7 (Figura B) (Figura A) 3. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 4. Vuelva a armar el tablero al revés de como lo desarmó.
- Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7353B EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.