Product Description And Specifications; Intended Use; Product Features - Würth HKS 18-A Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-3291-001.book Page 19 Friday, September 8, 2017 12:22 PM
 When working with the machine, always hold
it firmly with both hands and provide for a
secure stance. The power tool is guided more secure
with both hands.
 Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
 Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power
tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
 In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
 Use only original Würth accessories.

Product Description and Specifications

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.

Product Features

The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Lock-off button for On/Off switch
2 Worklight
3 Hex key
4 Auxiliary handle (insulated gripping surface)
5 Spindle lock button
6 Base plate
7 Wing bolt for parallel guide
8 Wing bolt for bevel-angle preselection
9 Scale for mitre angle
10 Cutting mark, 0°
11 Cutting mark, 45°
12 Parallel guide
13 Retracting blade guard
14 Lever for retracting blade guard
15 Wing bolt for bevel-angle preselection
16 Chip ejector
17 Blade guard
18 On/Off switch
19 Battery pack*
20 Handle (insulated gripping surface)
21 Saw spindle
22 Mounting flange
23 Saw blade
24 Clamping flange
25 Clamping bolt with washer
26 Battery unlocking button*
27 Fastening screw for extraction adapter
28 Extraction adapter
29 Clamping lever for cutting-depth preselection
30 Cutting-depth scale
31 Set of screw clamps*
32 Button for charge-control indicator*
33 Battery charge-control indicator*
34 Guide rail*
35 Vacuum hose*
36 Connection piece*
37 Universal adapter*
* The accessories illustrated or described are not
included as standard delivery.
19