Final FI-BA-SST Instrucciones De Empleo página 2

Part Names
Housing
Mini plug
(3.5 mm)
(2.5 mm)
List of items in package
Main unit / Carrying case / Earpieces
Maintenance
Remove gathered earwax from the sound conduit of the
earphone housing by gently using a slightly-damp, off-the-shelf
cotton swab. Please take care not to loosen the dust filter while
doing this.
The cable may harden if it comes into contact with certain chemical agents and in
particular with the natural oils in human skin. After using the product, please wipe the
cable with a soft damp cloth. Please refrain from using wet wipes that contain alcohol;
using these may result in hardening of the product. Please also refrain from using
alcohol-free wet wipes; these may contain a variety of other additives which may
adversely affect the product.
Warranty and after service
The warranty for this product is valid for 2 years from the day of purchase. During the
warranty period, we will repair the product based on the provisions below. The warranty
is only valid in the country in which the product was purchased. Please contact the store
you purchased the product from regarding questions pertaining to repairs. For products
purchased outside your country of residence and for support after the warranty period,
please contact us using the Contact Form on our website.
1. During the warranty period, we will repair the product free of charge if the product
failed even though it was used in accordance with the instructions in the User's
Manual and the Warning and Caution sections.
2. In the following cases, repairs to the product will be subject to a fee even during the
warranty period:
(1) The necessary documentation noted in the warranty card is not complete.
(2) The earphones were subjected to a strong impact or were allowed to get wet. Product
failure or broken wires resulting from an excessive use of force on the cables.
(3) Failure of the product or damage caused as a result of fire, earthquake, storm or
flood damage, lightning strike or other natural disaster.
(4) Repair of scratches on the surface of the housing or repair of the housing itself.
Specifications
3.5 mm: FI-BA-SST35
Product code
2.5 mm: FI-BA-SST25
Housing
Stainless steel
Driver
Balanced armature
R L
BAM Vent
Earpiece
Cable
Slider
Impedance 16 Ω
Sensitivity 112 dB / mW
Weight / Cable length 26 g / 1.2 m
Notes on Use
FI-BA-SST is made of metal. Please be aware that metal
parts may come into direct contact with your skin.
Therefore, if you have an allergy to metal you should not
C A U T I O N
use this product. Also, if you experience skin irritation,
stop using the product immediately and seek medical
attention. When using the product in cold climates, be sure
not to allow the product to strongly contact with your skin.
Ignoring the content of this indication could result in death
W A R N I N G
or serious injury.
Do not use the earphones while driving a bicycle, car or
PROHIBITED
motorcycle. Doing so could cause a traffic accident and/or
serious injury.
Do not use the product while walking in dangerous
PROHIBITED environments such as near a railroad crossing or intersection
where you cannot hear sounds from the outside.
Ignoring the content of this indication could cause injury
C A U T I O N
or damage to household articles in the vicinity.
When using the earphones, be careful not to play the sound
too loud. Doing so for a long period of time could affect
PROHIBITED your hearing. At 80 dB (A) exposure time shall be limited to
40 hours / week, whereas at 89 dB (A) exposure time shall be
limited to 5 hours / week.
If you experience skin irritation, stop using the product
PROHIBITED
immediately and seek medical attention, or consult with
our sales agent.
If the sound volume is too loud, sound can be heard by
PROHIBITED
other people. Use care not to disturb other people.
The way you position the earphone in your ear affects the sound quality. We recommend
・
trying different positions by moving the earphone around while playing music. This will
allow you to find the position that generates your most preferred sound. Once you
figure out your favorite position it will be easy to set that position each time. The shapes
of a person's right ear and left ear are usually different. Therefore, the best position for
each ear is usually different as well.
When removing the earphone from your ears, always hold the main unit first and then
・
remove. Pulling the cord could cause the wire to become disconnected.
Because the housing is made of metal, if you bring the earphone from a cold
・
environment and the temperature rapidly changes, condensation could occur inside the
housing. In such a case, leave it for a while until any condensation inside the unit
evaporates and then use the product.
Do not apply strong impacts to the earphones or put excess force on the cable. If the
・
product fails or wires are broken due to abnormal use, the product warranty is invalidated.
Leaving the product in locations exposed to direct sunlight, high humidity, or a dusty
・
environment could cause the product to fail.
If the product fails, do not attempt to disassemble.
・
The earphone jack is for stereo reproduction only. If the earphone is connected to a
・
monaural output jack, sound may not come out of one side.
Contacting us
Please contact us regarding inquiries using the Contact Form on our website:
www.snext-final.com