Diagnostic Software Access Dsa; Start Screen For Fsa System Software; Fsa System Software Language Configuration; Fsa System Software Screen Layout - Bosch FSA 760 Edition Manual Original

General procedure for measurements on the vehicle:
1. Switch off the ignition.
2. Connect the FSA 760 Edition with battery (B–) or
motor mass via connecting cable B–.
3. Connect required measuring lines to the vehicle.
!
Do not hold the measuring lines with your hand
during measurement.
4. Switch on ignition.
5. Perform measurement.
6. Switch off the ignition after measuring.
7. Disconnect measuring lines on the vehicle.
8. Disconnect connecting cable B–.
"
Measurement complete.
5.3

Diagnostic Software Access DSA

With DSA, you can:
R
Start Bosch applications (automatically as well).
R
Make interface settings.
R
Select DSA and Bosch application language.
R
Install software.
R
Update customer and vehicle data.
R
Terminate Bosch applications.
You will find more information in the DSA online help.
5.4

Start screen for FSA system software

i
If several applications are open, the speed of the
FSA system software may be impaired.
Robert Bosch GmbH
Operation | FSA 760 Edition | 23
5.5 FSA system software language
configuration
In the "Settings" menu, you can also select
the language with which you want to work in
FSA 760 Edition. This language will then be used for the
other Bosch applications as well.
5.6

FSA system software screen layout

Fig. 4: Functional screen layout
1 Program toolbar is displayed in all program levels: e.g. program
name, test step
2 Information box with information and instructions for operator
3 Status bar with information on the vehicle and sensors
4 Window area for test results
5 Hardkeys and softkeys
5.7

Touchscreen

The touch screen for the FSA 760 Edition edition is
operated by the finger or an object such as a stylus.
With the finger or stylus, tap the point on the touch
screen at which you want an action to be performed.
i
In the task bar under
the "ELO Touch Screen Properties" menu can
be used to carry out touch screen calibration. To
avoid errors, your eyes must be vertically above the
calibration point. Click on the calibration point as
accurately as possible.
en
the "General" option in
1 689 989 298 | 2017-03-08