Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws
A
B
Metra. The World's Best Kits.
®
Kia Sedona 2015-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted matte black
C
MetraOnline.com
D
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-7365B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 5/16/18 INST99-7365B
Publicidad
Manuales relacionados para Metra 99-7365B
Resumen de contenidos para Metra 99-7365B
- Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/16/18 INST99-7365B...
- Página 2 DASH DISASSEMBLY 1. Unclip the trim flap on the top of the steering column. (Figure A) 2. Unclip and remove the bezel surrounding the radio and instrument cluster. (Figure B) 3. Remove (4) screws securing the radio, unplug the radio from the factory radio and antenna connectors. (Figure C) Continue to Kit Assembly (Figure A) (Figure B) (Figure C) 1.800.221.0932 MetraOnline.com...
- Página 3 KIT ASSEMBLY 1. Secure the radio brackets to the pocket using the (4) #8 x 3/8” Phillips screws provided. (Figure A) 2. Remove the metal “DIN” sleeve and trim ring from the aftermarket radio. 3. Slide the radio into the bracket/pocket assembly, then secure it using the screws supplied with the radio. (Figure B) 4. Snap the radio trim panel into the factory trim bezel from the back side of (Figure A) (Figure B) (Figure C) the bezel. (Figure C) 5. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. 6. Secure the radio assembly to the dash using the factory screws, then reassemble the dash in reverse order of disassembly. REV.5/16/2018 INST99-7365B...
- Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/16/18 INST99-7365B...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/16/18 INST99-7365B...
- Página 6 DESMONTAJE DEL TABLERO 1. Desenganche las pestañas de la moldura de la parte superior de la columna de dirección. (Figura A) 2. Desenganche y quite la moldura que rodea el radio y el conjunto de instrumentos. (Figura B) 3. Retire los (4) tornillos que sujetan el radio, desconecte el radio de los conectores de la antena y el radio de fábrica.
- Página 7 Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente. 6. Asegure el ensamble de la radio al tablero usando los tornillos de fábrica, luego vuelva a montar el tablero en orden inverso al del desmontaje para completar la instalación.
- Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/16/18 INST99-7365B...