Miniland thermoadvanced easy 89389 Manual Del Usuario página 34

ENGLISH
- the above phenomenon does not affect the basic safety and essential
performance of the device, and the user can use it according to the
instruction. If you want to avoid the above phenomenon, please use it
according to the environment specified in the manual.
The device is intended for use in the electromagnetic environment specified
below. The customer or the user of device should assure that it is used in such
an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
The device is intended for use in the electromagnetic environment specified
below. The customer or the user of device should assure that it is used in such
an environment.
Immunity test
Electrostatic
discharge
(ESD)
IEC 61000-4-2
Declaration - electromagnetic emission
Compliance
Group 1
Class B
Not applicable
Not applicable
Declaration - electromagnetic immunity
IEC 60601test
level
±8 kV contact
±2 kV, ±4 kV, ±8
kV, ±15 kV air
Electromagnetic
environment - guidance
The device uses RF
energy only for its internal
function. Therefore, its RF
emissions are very low
and are not likely to cause
any interference in nearby
electronic equipment.
The device is suitable for
domestic establishment
and in establishment
directly connected to
the public low-voltage
power supply network that
supplies buildings used for
domestic purposes.
Compliance
level
Floors should be wood,
±8 kV
concrete or ceramic tie.
contact
If floors are covered with
±2 kV, ±4 kV,
synthetic material, the
±8 kV, ±15
relative humidity should
kV air
be at least 30%.
34
Electromagnetic
environment -
guidance