Pond Boss 52535 Manual Del Usuario página 8

Step 1A. Connect the two
1A 1B
extension tubes with the
coupler.
If no spitter is to be used,
proceed to Step 3.
Step 1B. Connect the extension
tubes to the diverter valve.
Make sure the arrow is pointing
up and the diverter valve is
connected as shown.
2
Step 2. For the use of the
diverter valve, connect 1/2
in. ID tubing onto the second
output of the diverter valve.
Connect the other end of tubing
to a spitter or other water
feature.
3
NOTE: Tubing and spitter are
not included.
Step 3. Choose a fountain head
for the desired water effect,
and assemble your choice as
shown.
VISIT WWW.THEPONDBOSS.NET FOR PRODUCT INFORMATION AND TIPS.
4