ASROCK H310CM-HDV/M.2 Manual De Instrucciones página 24

Ocultar thumbs Ver también para H310CM-HDV/M.2:

Tabla de contenido

Idiomas disponibles

NUT2

For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for

details: http://www.asrock.com

NUT1

Step 3

Move the standoff based on the

module type and length.

The standoff is placed at the nut

location D by default. Skip Step 3

and 4 and go straight to Step 5 if you

are going to use the default nut.

Otherwise, release the standoff by

hand.

Step 4

Peel off the yellow protective film on

the nut to be used. Hand tighten the

standoff into the desired nut location

on the motherboard.

Step 5

Gently insert the M.2 (NGFF) SSD

module into the M.2 slot. Please

be aware that the M.2 (NGFF) SSD

module only fits in one orientation.

Step 6

Tighten the screw with a screwdriver

to secure the module into place.

Please do not overtighten the screw

as this might damage the module.

Tabla de contenido