Playing tracks repeatedly
— Repeat Play
You can select:
• Repeat 1 to repeat a track.
• Repeat 2 to repeat a disc.
1
During playback, press (SHIFT).
2
Press (6) (REP) repeatedly until the
desired setting appears.
z Repeat 1
Repeat Play starts.
3
Press (SHIFT).
To go back to normal playback mode, select
"Repeat off" in step 2 above.
EN
Playing tracks in random
order
— Shuffle Play
You can select:
• Shuf 1 to play the tracks on the current disc
in random order.
• Shuf All to play all the tracks in random
order.
1
During playback, press (SHIFT).
2
Press (7) (SHUF) repeatedly until the
desired setting appears.
z Shuf 1
Shuffle Play starts.
3
Press (SHIFT).
To go back to normal playback mode, select
"Shuf off" in step 2 above.
20
z Repeat 2
Repeat off Z
z Shuf All
Shuf off Z
Labeling a CD
(CD unit with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name and select the specific tracks for
playback (page 22).
1
Play the CD and press (PTY/LIST) for two
seconds.
DISC
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
DISC
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
DISC
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to normal CD playback mode,
press (PTY/LIST) for two seconds.
Tip
To erase/correct a name enter "_" (under-bar) for
each character.
— Disc Memo