8. TROUBLESHOOTING
Depending on the symptoms, the possible cause of the problem and its solution can be implemented.
Problem
The motor dons't work
Pressure fluctuates
or machine vibrates.
Machine starts but no
water comes out.
In any other case, take the machine to the service agent
Cause
Machine not connected
to mains.
Mains switch in
bad state.
Cable damaged.
Switch damaged.
The On / Off switch is open.
Not enough water flow.
The tap is closed.
29/68
Solution
Connect to mains.
Try another switch. If the engine does
not start, take to nearest service agent.
Ake to service agent. Do not use tape
to solve problem.
Take machine to service agent.
Set the switch to "I"
Check that the hose is well connected
and that it has no leaks. Check that
the tap gives enough water flow to the
needs of the machine. Check the filter
and ensure that it is clean.
Open the tap
English