Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Measures
■
When working with hot, pressurized radiators you have to be very careful.
There is a high risk of scalding. Always wear hand and eye protection.
■
Make sure that the radiator / cooling system has cooled down before removing
the lid.
■
In order to avoid burns, do not start the engine before and during the pressure
test.
Radiator pressure test
■
Remove the original radiator cap, the cap of the expansion tank or cooler and
clean the area around the lid.
■
Choose an adequate, supplied adapter cap and install it on the cooling water
tank or the cooler.
■
Connect the hand pump with the quick couplings to the adapter cap and press
it until you have reached a pressure of 0.7 – 1.0 bar.
■
Caution: Avoid a pressure higher than 2.4 bar
■
Check the displayed value on the manometer. If the displayed pressure value
goes down, you have a leakage in the cooling system.
■
If the test results in having found a leak, check the system for where the leak is
located and repair the damage.
■
In case the displayed pressure value drops without fi nding a leak, please check
the head gasket.
■
After having fi nished the repair, check the system again.
List of radiator adapters:
see last page
Set de contrôle de circuit de refroidisse-
FRE
ment de poids lourds, 9 pièces
Cher client !
Nous vous remercions pour l'achat de ce testeur de pression de radiateur de
haute qualité. Il vous permet de localiser des fuites dans le vase d'expansion,
ainsi qu'au niveau des raccords, des conduites, etc.
Les adaptateurs disposent de raccords rapides, et la pompe présente un grand
manomètre facilement lisible.
Publicidad
