Bosch Professional GDS 18 V-LI HT Manual Original página 14

OBJ_BUCH-1140-001.book Page 14 Monday, January 25, 2010 1:09 PM
14 | English
Noise/Vibration Information
The measured values of the machine are listed
in the table on page 186.
Noise and vibrational values (vector sum of
three directions) determined according to
EN 60745.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
Mounting and Operation
Action
Removing the Battery
Inserting the Battery
Checking the battery charge condition
Mounting application tools
Reversing the Rotational Direction
Switching On and Off
Selecting accessories
Maintenance and Cleaning
For safe and proper working, always keep
the machine and ventilation slots clean.
Clean the application tool, the tool holder, the
power tool's ventilations slots, and the battery's
ventilation slots each time after using.
After-sales Service and
Customer Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
1 609 929 W06 | (25.1.10)
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Figure
1
2
3
4
5
6
–
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Page
187
187
187
188
188
189
190
Bosch Power Tools