MAXIMUS MDO0265027MPWC2 Manual De Instrucciones página 4

Step 2 (Fig. 6)
Move friction clips to the 5" holes. Tighten the screws.
Step 3 (Fig. 1)
Screw adapter (B) into socket in recessed housing.
Step 4 (Fig. 2)
Plug base cable connector into lamp (A).
Step 5 (Fig. 3)
Compress spring clips (D) and insert
into ears on inside of recessed housing.
Step 6 (Fig. 4)
Carefully route wires into fixture. Push retrofit into recessed housing
until the trim is flush with the ceiling surface.
For 5" / 6" / 6.5" housings without ears
Step 1 (Fig. 7)
Remove existing trim and CFL or incandescent bulbs. Unscrew the
two spring clips (D) and remove them.
Step 2 (Fig. 8)
Install two friction clips (C) onto the fixture. For 5 in. housing,
tighten the screws into the (5) holes with Phillips screwdriver. For 6
in. housing, tighten the screws into the (6) holes with Phillips
screwdriver.
Step 3 (Fig. 1)
Screw adapter (B) into socket in recessed housing.
Step 4 (Fig. 2)
Plug base cable connector into lamp (A).
Step 5 (Fig. 9)
Carefully route wires into fixture. Push retrofit into recessed housing
until the trim is flush with the ceiling surface.
Fig. 6
6
5
5" POSITION
Fig. 7
Fig. 8
6"
Fig. 9
4
6
5
6.5"
5"