H-6954
3 CHANNEL CABLE
PROTECTOR
COMPONENTS
36" Lineal Protector
ASSEMBLY
Interlock with dog-bone connectors to extend protection
length. (See Figure 1)
Figure 1
• Inspect areas for safety hazards.
• Assemble sections by aligning female connectors
over male connectors and press with foot to secure.
• Close cover flush with base.
• Test installation for intended use.
• Periodically inspect installation.
PAGE 1 OF 6
1-800-295-5510
uline.com
INSTRUCTIONS
CHANNEL CAPACITY
LOAD CAPACITY
The 3 Channel Cable Protector has different load
supporting capabilities depending on type of vehicle
and temperature. Suitability must be verified by testing
under actual conditions.
Load-supporting capacity varies by type of loading
conditions and environmental conditions. The load
capacity decreases in warm environments. Test before
use and inspect periodically.
MODEL
H-6954
OPERATING TEMPERATURE
-40° to 120°F (-40° to 48°C)
CHEMICAL RESISTANCE
Tested for compatibility with common motor oils, gasoline
and diesel fuel. Limited resistance to brake fluids and
other chemicals.
MATERIAL
UV-stabilized polyurethane elastomer.
Pour le français, consulter les pages 5-6.
CHANNEL CAPACITY - MAX. DIAMETER INCHES
2 Outer Channels
Center Channel
LOAD CAPACITY PER TIRE
NO.
MAX LOAD 70°F (21°C)
14,210 lbs.
Para Español, vea páginas 3-4.
2.25" width x 2.25" height
1.705" width x 2.25" height
LOAD CAPACITY PER AXLE
MAX LOAD 70°F (21°C)
28,420 lbs.
0421 IH-6954