Getting Started And Operation - Hama Car Manual De Instrucciones

Do not put any bank cards or similar cards with magnetic strips, or other magnetically sensitive objects, on
the product. The data on the cards could be damaged or deleted.
4. Installation
Warning
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not
blocked or restricted.
• Do not allow yourself to be distracted by the product, for example when driving a vehicle or operating
sports equipment. Always pay attention to the surrounding traffic and your environment.
Note
Never apply force when using the product or during installation.
• Set the recess of the inductive charger onto the bracket (A–1).
• Move the inductive charger up or down until it clicks into place or is seated firmly.
• Remove the protective film from the suction cup and position it on a clean and flat surface
(e.g. window pane) (A–2).
• If the suction cup holder is to be attached to a rough or uneven surface (e.g. a dashboard), an adapter plate
is optionally available.
• Push the locking lever (A–3) to fasten the suction cup.
• Using the ball joint (A–4), you can adjust the position of the inductive charger.
• To remove the suction cup from the surface, pull up the locking lever. Then gently pull the flap to completely
release the suction cup.

5. Getting Started and Operation

Warning
• Only use suitable charging devices or USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and do not try to repair
them yourself.
• Only use the inductive charger in combination with the included car charger.
• Connect the included Micro-USB cable to the Micro-USB input (3) on the inductive charger and the USB
port (1) of the car charger.
• Plug the car charger into a car socket in the vehicle electrical system.
• When the power supply is active, the status LED (2) lights up.
3