Warranty Disclaimer - Hama Car Manual De Instrucciones

Note
• For charging a terminal device with the inductive charger, your terminal device has to be compatible
with the induction charging technology. Please read the operating instructions of your device.
• Please note that mobile phone sleeves, covers, etc. and other materials between the inductive charger
and the backside of your terminal device disturb or prevent actually the charging process.
• Press the button on the back of the inductive charger to open the retaining jaws (C–1).
• Insert the terminal device of your choice and secure it in place by lightly pushing the retaining jaws together
(C–2).
• Charging starts as soon as an effective induction field has been generated. The status LED (2) changes its
colour. The current charging status appears on your terminal device.
• If no connection can be established through induction, you may have to change the position of your
terminal device.
• Charging stops automatically once your device's battery is fully charged. The status LED (2) changes its
colour.
• In order to easily remove the terminal device, press the button on the back of the inductive charger.
• Disconnect all cable and mains connections after use.
Note
For some vehicle types, the ignition has to be switched on to supply power to the car socket. For more
information, please refer to your vehicle's manual.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

7. Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failure to observe the operating instructions and/
or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
4