Remote Control And Receiver - Klarstein 10031082 Manual Del Usuario

Remote Control and Receiver

Important Hints
• To avoid damaging the transmitter prevents dropping or banging the transmitter.
• Do not attempt to shorten the receiver' s antenna wire.
• If the transmitter is not used for some time, please remove batteries to avoid leakage.
• That will damage the transmitter.
Remote Control and Receiver
After installing the receiver, make sure the transmitter has its batteries installed. If the transmitter is not functio-
ning properly or not function or if the fan is not moving please do the followings:
• Turn off the electrical mains at the circuit breaker/fuse box.
• Follow „Wiring Diagram" to reinstall the receiver.
Functions of Transmitter
• HI: Set fan to high speed.
• MED: Set fan to medium speed.
• LOW: Set fan to low speed.
• OFF: Turn off the ceiling fan.
• LIGHT ON: Turn on the light
• LIGHT OFF: Turn off the light
The transmitter is designed for use with either wall bracket for transmitter (d) or the transmitter cover (b).
17