Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
PACKAGE CONTENTS
A - Top cover x 4
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shaded areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location is away from other nighttime light sources such as street or porch lamps. These light
sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Preparing for installation
NOTE: The solar panel will turn
the light on automatically at
dusk.
□ Push the power button on the
bottom of the light body (A) to turn
the light on. Check that the light is
on by covering the solar panel with
your hand to simulate darkness.
□ Cut the connector between the
stakes.
□ Insert the two stakes into each
other's slot.
□ Firmly insert the posts of the
assembled stake into the holes
on the bottom of the light body.
Use and Care Guide
Solar LED Deck Light
A
B
B - AA 1.2V 1000mAh Ni-Mh
rechargeable battery (pre-installed) x 4
C
C - Stake x 4
2
Installation options
NOTE: Do not use a hammer. If the ground is hard, use
water to soften or a trowel to loosen the soil.
2a
Ground Installation
□ Push the assembly firmly into the ground.
2b
Deck or rail mount
NOTE: Screw anchors (E) are included for extra support. The
included screws are designed to screw easily into wood. If
you would like a more permanent or secure hold, install the
anchors prior to attaching the light to the surface.
□ Attach the light body on the deck (without the stakes) with screws
provided (D).
Please contact 1-855-HD-HAMPTON for further assistance.
Item #1005 698 132
Model #62106
D
D - Screw x 12
E - Anchor x 12
A
C
A
C
D
A
DECK
D
A
DECK
HAMPTONBAY.COM
E
Publicidad
Manuales relacionados para HAMPTON BAY 62106
Resumen de contenidos para HAMPTON BAY 62106
- Página 1 Item #1005 698 132 Model #62106 Use and Care Guide Solar LED Deck Light PACKAGE CONTENTS A - Top cover x 4 B - AA 1.2V 1000mAh Ni-Mh C - Stake x 4 D - Screw x 12 E - Anchor x 12...
- Página 2 Maintenance Replacing the battery CAUTION: When replacing the battery, use one (1) 1000 mAh NiMH AA 1.2V rechargeable battery. IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. NOTE: For best performance, replace with a rechargable 1.2V NiMH battery of 1000 mAh or greater every 3 years or when performance diminishes.
- Página 3 Artículo #1005 698 132 Modelo núm.62106 Guía de uso y cuidado Lámpara LED para terraza CONTENIDO DEL PAQUETE A - Cubierta superior x 4 B - Batería AA (preinstalada) recargable C - Estaca x 4 D - Tornillo x 12 E - Ancla de de NiMH de 1.2 V, 1000 mAH x 4...
- Página 4 Mantenimiento Cómo reemplazar la batería PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería recargable AA de NiMH de 1000 mAh y 1.2 V. IMPORTANTE: Desechar las baterías de acuerdo con las regulaciones locales, estatales y federales. NOTA: Para un mejor funcionamiento, reemplazar con una batería recargable de NiMH de 1.2 V y 1000 mAh cada 3 años o cuando el rendimiento disminuya.