Connecting The Vacuum Cleaner - Makita XCC01 Manual De Instrucciones

Installing optional wheel cover
Mount an optional wheel cover aligning its guide
grooves with the guide ridges on the gear housing.
Then tighten the screw securely.
1
2
► 1. Guide grooves on wheel cover 2. Guide ridges on
gear housing
Dust bag
Optional accessory
The use of the dust bag makes cutting operations clean
and dust collection easy. To attach the dust bag, fit it
onto the dust spout.
2
► 1. Dust bag 2. Dust spout
1
2
1
The neck of the dust spout rotates freely. Position the
dust bag so that you can operate the tool comfortably.
When the dust bag is about one-third full, remove the
dust bag from the tool and pull the fastener out. Empty
the dust bag of its contents, tapping it lightly so as to
remove particles adhering to the insides which might
hamper collection.
1
► 1. Fastener

Connecting the vacuum cleaner

Optional accessory
When you wish to perform clean cutting operation,
connect a Makita vacuum cleaner to your tool.
► 1. Hose of the vacuum cleaner 2. Dust spout
13 ENGLISH
1
2