Connecting The Vacuum Cleaner - Makita DCC500 Manual De Instrucciones

The neck of the dust spout rotates freely. Position the
dust bag so that you can operate the tool comfortably.
When the dust bag is about one-third full, remove the
dust bag from the tool and pull the fastener out. Empty
the dust bag of its contents, tapping it lightly so as to
remove particles adhering to the insides which might
hamper collection.
1
► 1. Fastener

Connecting the vacuum cleaner

Optional accessory
When you wish to perform clean cutting operation,
connect a Makita vacuum cleaner to your tool.
► 1. Hose of the vacuum cleaner 2. Dust spout
1
2
11 ENGLISH
Installing water supply cover
Optional accessory
CAUTION:
When installing an optional wheel
cover, be sure to tighten the screw securely.
Removing standard-equipped wheel
cover
Remove all the attachments on the pre-installed wheel
cover before replacing it with an optional cover.
Loosen the screw and pull the cover apart from the gear
housing.
► 1. Screw
Installing optional wheel cover
Mount an optional wheel cover aligning its guide
grooves with the guide ridges on the gear housing.
Then tighten the screw securely.
1
2
► 1. Guide grooves on wheel cover 2. Guide ridges on
gear housing
1
1
2