www.domo-elektro.be
ADD WATER indicator light will remain lit. In that case, press the POWER
button to return to the normal state of the appliance.
•
Replace the water in the water tank at least once a day to guarantee clean ice
cubes. When not using the appliance, always drain the water from the water tank.
Always use clean water when using the ice cube maker.
•
If the operation of the appliance is interrupted by for example a lack of water or a
power cut, it will take 3 minutes for the appliance to restart.
Descaling
Descale the appliance regularly to avoid calcification and to maintain a well operating
appliance. Use a descaling product for for example coffee makers, or use a solution of
1/2 vinegar and 1/2 water.
Fill the water tank with the product/solution (do not exceed the maximum level)
and switch on the appliance. The appliance will now pump water into the ice tray.
Wait until the tray is filled with water (the supply of water to the tray will stop)
and immediately press the POWER button. The appliance switches off and will
release the product/solution from the ice tray. Repeat this cycle a few times with
the descaling product/solution. Afterwards, fill the water tank with clean water and
repeat the procedure until the smell of the descaling product/solution has disappeared
completely.
33
DO9200IB