• Start-up :
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
• Switching off the automatic cooking :
Action
Zone selection
Power level selection
Control panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of
cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).
• Locking :
Action
Start
Hob locking
•
Unlocking :
Action
Start
In the 5 seconds after start :
Unlocking the hob
COOKING ADVICES
Pan quality
Adapted materials: steel, enamelled steel, cast iron, ferromagnetique stainless-steel,
aluminium with ferromagnetique bottom.
Not adapted materials: aluminium and stainless-steel without ferromagnetique bottom,
cupper, brass, glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
• Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This
water must heat in a few seconds.
•
A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. These
noise doesn't mean any failure on the appliance and doesn't influence the cooking operating.
Control panel
Press on key [ + ]
Press on key [ + ]
Press on key [ + ]
Press on key [ - ]
Control panel
Press on key [ - ]
Press on key [ + ]
Control panel
Press on key [ 0/I ]
Touch simultaneously [ - ] and [ + ]
at front right *
Press on key [ + ]
Control panel
Press on key [ 0/I ]
Touch simultaneously [ - ] and [ + ]
at front right *
Press on key [ - ]
23
Display
[ 0 ] and control light on
[ 1 ] ...... to....... [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] [ 8 ] [ 7 ] .........[ 1 ]
[ 7 ] is blinking with [ A ]
Display
[ 9 ] [ 8 ] [ 7 ]........ [ 0 ]
Level selected
Display
[ 0 ] or [ H ] on 4 displays
No modification
[ L ] on 4 displays
Display
[ L ] on 4 displays
[ 0 ] or [ H ] on 4 displays
No light on the displays