Bar Maid GP-100 Manual De Instrucciones página 3

ASSEMbLy INSTruCTIONS
1. Attach air blower onto the base with screw provided.
2. Insert short brush onto center post of the base.
3.
Insert remaining brushes onto outer posts.
OPErATING INSTruCTIONS
Note:
Glasses must be washed, rinsed and still damp when inserted into the glass
polisher to get best results. Dry glasses are difficult to polish.
1.
Plug power cord into grounded outlet.
2.
Press ON/OFF button to turn glass polisher ON.
3.
Grasp glass at the base and insert onto center brush, holding glass base stationary
or with slight up and down movement while center brush dries and polishes the
inside of the glass and four outer brushes dry and polish the outside of the glass.
4.
Remove glass from glass polisher.
5.
Press ON/OFF button to turn glass polisher OFF when not in use.
Air Blower Brushes
Short Brush
ON/OFF Button