When Connecting With A Back-Up Camera - Pioneer AVH-P6500DVD Manual De Instrucciones

Connecting the Units

When connecting with a back-up camera

When using this product with a back-up camera, automatic switching to video from a
back-up camera when the gear shift is moved to REVERSE (R) position is possible.
10 cm
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
Note:
• It is necessary to set to B-CAMERA in SETUP when
connecting the back-up camera.
7
Hide-away unit
RCA cable
(sold separately)
To video output
8 m
1. Clamp the lead.
We recommend that you use
a camera which outputs
mirror reversed images.
Back up camera
Extension lead (supplied)
Fuse resistor
2. Clamp firmly with
needle-nosed
pliers.
Fig. 4