Installing The Software - Canon imageCLASS LBP215x Introducción

Quick Setup
Configuring the Machine
To connect via USB
Do not connect the USB cable before installing the
driver. If you did, disconnect the USB cable from the
computer, close the dialog box, and then perform
the following procedure from step 1.
1.
Install the driver and software.
P.10 "Installing the software"
• When a screen with instructions for
connecting the USB cable to the machine is
displayed, remove the sticker that covers the
USB port.
En
Now you are finished with the
configuration of the initial settings.
10

Installing the software

• The procedure described here is only applicable
when your computer runs on the Windows OS.
For more details on the software installation
procedure, see the driver's manual.
• For the installation when your computer runs on
the macOS, see the driver's manual.
• Your machine may not come with the driver for
the macOS, depending on the time of purchase.
New drivers are uploaded to the Canon website,
and you can download and use the latest one.
1.
2.
If the screen is not displayed properly, re-
insert the CD-ROM/DVD-ROM or search for
"D:\MInst.exe" on the Windows platform (This
description assumes that "D:" is the CD-ROM/
DVD-ROM drive name).