Conceptronic CMED3PLUS Guía De Instalación Rápida página 23

ENGLISH
3.2 Connection to your Television
Connecting the device with a TV (illustrated as follows)
The three RCA connectors (yellow, red, white color) of the AV cable should match with the
corresponding input jacks on your TV. If your TV has no Composite input available, use the
included SCART to Composite/Audio cable.
You can also use the Component Output of the Media Player to connect to your LCD/Plasma TV
(No Cable included). For sound, you can also use the SPDIF Output of the Media player to
connect to your Amplifier / Speakerset (Cable included).
NOTE:
The Conceptronic CMED3PLUS can be used with a television or with a monitor.
When using a TV you can use the S-VIDEO, Composite, Composite to SCART or Component output
of the CMED3PLUS. Please check the manual of your TV to select to correct input channel to
display the video output of the CMED3PLUS. If you have used the CMED3PLUS in VGA mode,
please press the VGA button on your remote control to change the VIDEO output again to your
TV.
When using a monitor you have to use a monitor VGA cable and connect it to the VGA OUT (6)
connector. Press the VGA button on the remote control (a number of times) until the monitor is
switched on automatically (out of Stand-By mode).
To switch between the various modes available (VGA, TV, S-VIDEO,etc.) you need to press the
VGA button on the remote control.
23