Technical Data; Assembly And Operation - Rockwell Sonicrafter F80 Manual De Instrucciones

OSCILLATING TOOL
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Double insulation
Wear ear protection
Wear eye protection
Wear dust mask
Wear protective gloves
Avoid danger of injury from the sharp
edges of the accessories.
Accessories can become very hot while
working, presenting danger of burns!
Make sure the tool is unplugged prior to
changing accessories.
Before working with your tool make sure
that no power cords will be damaged.
High oscillation frequency.
Low oscillation frequency.
8

TECHNICAL DATA

Rated voltage
Amps
Oscillation speed
Oscillation angles
Protection class
Tool weight (without power cable)
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.

ASSEMBLY AND OPERATION

Action
Changing The Work Mode
WARNING: Before changing the
work mode make sure that the
On/Off Switch is OFF.
Fast Cutting Work Mode(5
Aggressive setting for fastest cutting
or highest removal rate of material,
where smoothly finished surface is not
required.
Smooth Control Work Mode(3.4
General purpose setting for slower but
smoother and more detailed cutting,
sanding and grinding.
Mounting Accessories
Mounting The Sanding Sheet
Operating The On/Off Switch
Using The Variable Speed Dial
LED Light
ENG
120 V~60 Hz
4.2 A
11000-20000/min
5°/3.4°
4.0 lbs
Figure
):
o
See Fig. A
):
o
See Fig. B-D
See Fig. E
See Fig. F
See Fig. G
See Fig. H
/II