Component List; Safety Instructions - Rockwell JAWSTAND XP Manual De Instrucciones

Portable Work SuPPort

CoMPoNeNt liSt

LOW fRiCTiON sLidEs
1
CLaMP haNdLE
2
BEVEL hEad
3
BEVEL LOCKiNG KNOB
4
COLuMN
5
BasE
6
LEG
7
NON sKid RuBBER fEET
8
MaCRO-hEiGhT LOCKiNG KNOB
9
BEVEL sCaLE
10
POiNTER
11
LEVELiNG BuBBLE
12
MOViNG CLaMP Pad
13
fixEd CLaMP Pads
14
PRECisE hEiGhT adjusTMENT haNdLE
15

SafetY iNStruCtioNS

WarNiNG: When using this product basic safety
precautions should always be followed. failure
to follow all instructions listed below may result in
personal injury.
Read all these instructions before attempting to operate
this product and save these instructions.
1. keep work area clear.
- Cluttered areas and benches invite injuries.
2. Make sure all moving parts are free from
interference.
3. ensure jaWStaNd XP
ground in a stable manner.
8
is set up on firm, level
tM
4. keep other persons away.
- do not let persons, especially children, not involved in
the work touch the tool and keep them away from the
work area.
5. be aware of over-balancing. When a large piece
is cut from one end of a job, the remaining piece may
be heavy enough to tip the jaWsTaNd xP
ensure the workpiece is well supported.
6. Check to make sure that all fixing screws
and knobs are tight and all legs are correctly
positioned.
7. the tool must be used only for its prescribed
purpose. any use other than those mentioned in these
instructions will be considered a case of misuse.
The manufacturer shall not be liable for any damage or
eNG
. always
TM