Schneider SFES 2752 Manual De Instrucciones página 24

If the Fridge/Freezer is not level, the doors and magnetic seal alignments will be
affected and may cause your Fridge/Freezer to work incorrectly.
DO NOT TURN ON THE FRIDGE/FREEZER FOR 4 HOURS
After the Fridge/Freezer is in place it needs to be left for 4 hours. This allows
time for the coolant to settle.
INSTALLATION
Don't cover or block the vents or grilles of your appliance.
Servicing
This product should be serviced by an qualified technician and only genuine spare
parts should be used. Under no circumstances should you attempt to repair the
appliance yourself. Repairs carried out by inexperienced persons may cause injury
or serious malfunctioning. If you need technical assistance you can contact with
your local official technical services. Please find the contact details at
www.schneiderespana.es
When the appliance is not in use for long periods, disconnect it from the electricity
supply, empty all foods and clean the appliance, leaving the door ajar to prevent
unpleasant smells.
Changing the internal light
1. Before carrying out the bulb replacement always turn the thermostat control to
position "OFF", and then disconnect the mains supply.
2. Hold and lift up the light bulb cover.
3. Remove the old bulb by unscrewing it in an anti-clockwise direction.
4. Replace with a new bulb by screwing it in a clockwise direction marking sure
that it is secure in the bulb holder.
5. Refit the light cover and re-connect your Fridge/Freezer to the mains supply
and switch on.
24