Set The Alarm; Set The Time - Schneider Maestria Manual De Instalación

1. INSTALLATION
Plug the power cable to the mains
(230V~50Hz).
A backup battery (CR2032) is provided
to save the time and alarm in the event
of a power failure. Open the battery
compartment with a screwdriver (not
provided) and insert the battery. Tighten
the screw securely so that the battery is
kept out of each of small children.
2. POWER ON AND PLAYBACK MODE SELECTION
Long-press
device,
STANDBY mode. Short-press to select
RADIO / USB / BLUETOOTH / AUX IN
playback mode.

3. SET THE TIME

In Standby mode, long-press SET to start
time preset mode. The hour digit is
flashing, press
short-press SET again, the minute digit
is flashing, press
minutes, short-press to confirm the new
time setting.
MODE to power on the
long-press again to enter
/ to select the hour,
/ to select the

4. SET THE ALARM

SET AN ALARM
This device is equipped with 2 alarms AL1
and AL2. In standby mode, long-press AL1
or AL2. When the hour/minutes digits
flash, short-press
and short-press AL1 or AL2 again to set the
minutes. And then, short-press
select BUZZER /RADIO / USB / BLUETOOH
as alarm tone. Short-press
again to confirm.
VIEW/CANCEL THE ALARM
In standby mode, short-press AL1 or AL2
and the display will show "ALARM ON" and
Alarm icon flashing, and press
select "ALARM OFF" mode, AL1 or AL2 icon
will no longer appear on the screen.
TURN OFF THE ALARM
Press any key (except SNOOZE and AL 1/2 keys) to stop
completely the alarm.
INFORMATION FOR SETTING THE ALARM IN BLUETOOTH
MODE
Two requirements:
- The smartphone's Bluetooth mode must be activated and
the phone paired with the alarm clock.
The music player must have been launched by user. If the
music player has not been launched, the alarm clock will not
be able to start playing.
Working mode:
If the alarm is still running after 3 minutes, the alarm clock
will stop playing the music by Bluetooth and switch to
Buzzer mode. This is done to ensure the alarm will ring in all
circumstances, even in the event of Bluetooth pairing
failure.
SNOOZE MODE
When an alarm rings, short-press the
SNOOZE/DIMMER button. The alarm will
stop and resume in 6 minutes.
Press any key (except SNOOZE and AL 1/2
keys) to stop completely the alarm.
- 5 -
or to set the hour
or to
AL1 or AL2
or to