Power; Usb Data Cable To Use; T-Flash Card To Install/ Remove; Basic Instructions - TUBI T4 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.4 Power

Ø
To turn on the phone, please press the switch button for a while.
Ø
When you open the phone and insert SIM card, your phone will automatically verify whether the SIM
card is available. Then the screen will display the following order:
——Enter the phone password (if you set the phone lock password)
Ø
Mobile decryption is decrypt; the phone will search for available networks automatically.
Once contacted, the network provider's name will appear in the upper left corner of the screen. It
means cell phone is in the normal standby mode, you can engage in normal use.
Note: If the screen says "no service" means that you hare out of the normal network coverage
(service area), but you can still send an emergency call as the signal strength.

2.5 USB data cable to use

The way of using USB data cable: one end of the USB data cable is inserted into the PC (personal
computer) on the USB port, then connect the other end to the bottom of the phone, "Charge / Data
Interface" on.
The phone supports USB, USB data cable you can connect your phone to your computer, Mobile Phone
TUBI T4 and the computer to copy, move files, etc, T can also browse the photos stored on the card,
audio, video and other documents.
Note: This phone only supports the power-state data transmission.

2.6 T-flash card to install/ remove

T-flash card, which is a multimedia memory card to increase memory, is built into the fuselage of
the phone. This relatively small card should be installed or removed carefully to avoid damage.
non-professional personnel had better do not open the fuselage T-flash card extraction.
Note: This phone does not support T-flash card hot swap.

3.1 Keyboard introduction

3.1.1 Basic keys

Ø
ON / OFF button:
——Press and hold button function of the Executive on or off ; in any menu interface, press this button to
the idle screen.
Ø
OK button:
——Standby for access to the main menu interface, the implementation of identified functions in other

3. Basic Instructions

39

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para TUBI T4

Tabla de contenido