Zeegma Puur Manual De Usuario página 6

Detailed elements
EN
STEAM MOP ASSEMBLY
Note: every steam mop is tested before it is packed in the factory.
You may see water remains in the tank before you use the product
for the fi rst ti me.
Warning: before you start assembling, make sure the device has
been switched off , unplugged, cooled and that water tank is empty
or water level is minimum.
Water tank assembly
1.
Place the water tank (4) in the main body of the device (B).
2.
To remove the tank, press the protecti on key located in the
main body above the tank.
Handle assembly
1. Press the tube (C) into the handle (A), adjust it unti l you can
hear a disti ncti ve click.
2. Press the tube with handle into the main body (B), adjust it
unti l you can hear a disti ncti ve click.
1. Handle
2.
Hook
3. Tube
4. Water tank
5.
Water tank cap
6. Grip
7.
Feeder cable
8.
Steam adjustment knob
9. On/off switch
10. Head rotati ng unit
11. Steam head
12. Water fi lter
13. Steam key