How To Use - Zeegma Puur Manual De Usuario

EN

HOW TO USE

1.
Pour water into the tank:
NOTE: To fill the tank, use demineralized water only. Do not use
tap water because it may lead to accumulation of scale and in
effect damage.
NOTE: Refill the tank with water when the device is inactive and
unplugged!
•
Take the tank (4) out of the main body (BS).
•
Remove the cap from the water tank (5).
•
Pour water into the tank (4).
•
Close the cap.
•
Put the tank back into the body.
2. Insert the device plug into the socket.
3.
Switch the device on with the on/off switch (9). Red light
around the knob (8) shows that the steam mop is heating
up.
4.
When it is hot, the light will turn blue.
5. The steam head can rotate at various angles thanks to
which you can clean corners and low areas.
NOTE: The surface of the steam head may be hot during and
immediately after use.