Famination Distinction A1 Serie Manual Del Propietário página 18

How to Operate Your Ceiling Fan (D1)-continued
4. Remote Control Setting and Speed (RPM)
Setting Process : (Figure 4)
1) When powering on your fan, do not press any
button(s) before pressing the "SET" button,
otherwise it will fail the learn procedure. If you press
a button before the "Set" button, please turn the
power off then on again, and start the process again.
2) After installing the unit and restoring power to
your fan, press and hold the "SET" button 1-5
seconds. You must press the "SET" button within 30
seconds of restoring power to the fan.
3) When press the "SET" button the fan will make
one musical sound and start to run to begin the control
setting process.
4) DO NOT press any button(s) after pressing the SET
button and while the fan is programming or it will fail
to program. The fan will run in both directions for a
total of approximately 5-7 minutes.
5) When the fan stops after approximately 5-7 minutes
the fan will make two musical sounds that mean the
control and speed setting process is complete. The fan
is now ready for normal use.
5. Remote functiolns: (Figure 5)
• Indicator LED light: fan speed and light
dimmer indicator
• button: Tape once turn off the fan. Press and
hold this button for 5 seconds to turn on or turn off
the buzzer.
• Fan Speed:
Turn on the fan and turn speed up.
Turn on the fan and turn speed down.
• Light button: Turn ON\OFF the light.
Increase light output level.
Decrease light output level.
• Sleep Timer:
The fan and light will turn off after 1 hour.
The fan and light will turn off after 3 hours.
The fan and light will turn off after 6 hours.
• Home Away: Tap this button, the light will
blink twice signaling this feature is on; the fan
will turn off and the light will randomly turn on
and off while you are away. Pressing any button
will cancel the feature.
• Fresh Air: Fan speed will modulate to
simulate a natural breeze.
Dip Switch
NOTE: If you want to change the blades: turn
• Safe Exit: Tap once, the light will blink once;
fan and light will turn off after 1 minute. Pressing
any button will cancel this feature.
• Reverse button:
Summer- The fan runs counterclockwise.
Airflow will provide a downward cooling breeze.
Winter- The fan runs clockwise. Airflow will force
warm air downward without a noticeable breeze.
18
SET
Figure 4
Figure 5