How To Install Your Remote Control (D1) - Famination Distinction A1 Serie Manual Del Propietário

How to Operate Your Ceiling Fan (D1)-continued
6. "D" and "O" dip switch:
For this fan, switch should be in the "D" position, allowing
for dimming of the light. (Figure 6)
The receiver provides the following protective function:
Lock position: The DC motor has a built-in safety feature
against blade obstruction against obstruction during
operation. If something obstructs the fan blades the motor
will stop operating after 60 seconds of interruption. Please
remove obstacles and reset.
NOTE: Please put in "O" position for F2 light kit.
How to Install Your Remote Control
Installing Wall Plate: (Figure 1)
1.
Attach wall plate using the two provided screws.
Dip Switch
19
SET
Figure 6
(D1)
Figure 1