General Specifications - Yamaha STAGEPAS 1K Manual De Instrucciones

General Specifications

 Main specifications
System Type
Frequency Response (–10 dB)
Coverage Angle (Horizontal x Vertical)
Crossover Frequency
Maximum Output Level
(Measured peak, IEC noise@1m)
Power Requirements
Power Consumption
Dimensions (W x H x D)
Weight
 Mixer section
The number of Mixing Channels
Analog Inputs
Bluetooth Audio Inputs
Content Protection Method
Bluetooth Version
Transmission Frequencies
Wireless Output
Maximum Wireless Output Power (EIRP)
Channel Functions
EQ/Effects
Outputs
External Controls
 Amplifier section
Rated Output Dynamic
 Speaker section
Enclosure
Speaker Unit
Dimensions (W x H x D)
Weight:
 Accessories
Included in the package
Optional accessories
Powered subwoofer with a line array speaker
37 Hz - 20 kHz
170° x 30°
240 Hz
119 dB SPL
110-120V 60Hz, 220-240V 50/60Hz
25W (idle), 85W (1/8 power)
System (maximum) 334 x 2,000 x 418 mm
23.0 kg
5
Mono mic/line x 3, mono line x 2, stereo line x 1
LINK IN (MONO)
A2DP (SBC, AAC)
SCMS-T
Ver 5.0
2,402 - 2,480 MHz
Class 1
15 dBm (32 mW)
Hi-Z switch: CH2/3
1-knob EQ: CH1/2/3/ST
MODE (SPEECH/MUSIC/CLUB)
4 types of reverb (HALL/PLATE/ROOM/ECHO): CH1/2/3
LINK OUT (MONO/R)
MONITOR OUT (MONO)
Reverb foot switch
STAGEPAS Editor (iOS/Android app)
1000W (Subwoofer: 810W, Line array speaker: 190W)
Line array speaker : Enclosed
Subwoofer : Bass-reflex type
Line array speaker : 1.5" (3.8 cm) Cone × 10
Subwoofer : 12" (30 cm) Cone
Line array speaker : 67 x 582 x 86 mm
Spacer (each) : 67 x 555 x 86 mm
Subwoofer : 334 x 550 x 418 mm
Line array speaker : 1.8 kg
Spacer (each) : 0.6 kg
Subwoofer : 20.0 kg
Power cord x 1, Dedicated cover x 1, Owner's Manual
DL-SP1K (dedicated dolly)
General Specifications
STAGEPAS 1K Owner's Manual
51