Descargar Imprimir esta página

Ceado CP150 Manual De Uso página 20

Ocultar thumbs Ver también para CP150:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

20
The EC declaration of conformity for this appliance is available in the Products section of our
website www.ceado.com.
INSTALLATION
Comply with the Safety recommendations indicated above and hereafter when installing the
appliance.
1.
Make sure that the mains voltage is as indicated on the rating label of the appliance and that
the electrical system is grounded and equipped with a switch.
2.
Install the appliance in a DRY, PROTECTED place, far from water sprays and jets, heat
sources, open flames and inflammable substances.
Place the appliance on a flat, horizontal, stable surface where it cannot tip over.
Before connecting the plug to the power socket, make sure that the ON-OFF switch
(11 Fig. 1) is in position "O" (OFF).
3.
Plug the power cable into a socket protected by a suitably rated circuit breaker (MCB) or fuses.
Do not use an adaptor plug.
4.
Stretch the power cable out to full length. Do not let it pass over sharp edges or hot surfaces.
Do not let oil spill on it. Do not let the power cable hang loose from the counter on which the
appliance stands.
GB

Publicidad

loading