8dTek COMBO JET TSM8800 Manual Del Usuario página 11

T M
AD INSTRUMENTS
The following parameters may be modified:
(a.) SATELLITE NAME: Use [◄][►] key to scroll through the stored memory
and select satellite, or press OK to view the satellite list for selection.
(b.) LNB TYPE: Select the setting that requires editing, and input its
parameters accordingly.
(c.) LNB.LOW / LNB.HIGH: input the parameters from the numeric keypad.
(d.) TRANSPONDER modification of TP.
(e.)FREQUENCY: Press [◄][►]key to add or reduce values or specify the
desired value from the numeric keys, or press OK key to view the
transponder list for selection.
(f. ) SYMBOL RATE: Input the specific value from the numeric keys.
(g.) POLARIZATION
Note: Make sure all the above information are set – including the LNB type
and frequency – in order to search the signal successfully.
(h.)SCAN CHANNEL: Once all data are correctly input, use [◄][►]key to
select the scan mode, then press OK to launch search.
(1.) TP SCAN: Scan all transponders one by one, see<Figure2-5>
(2.) TP NIT: Scan the transponders in one certain network.
(3.) SAT SCAN: Scan all the transponders in one satellite (these
transponders have been set in advance).
(4.) Blind 8MHz: Blind scan the frequency from 950-2150 by step 8MHz increment;
see<Figure2-6>
Use [◄][►]key to select between vertical and horizonta
<Figure2-5>
DTVLINK
8