8dTek COMBO JET TSM8800 Manual Del Usuario página 13

T M
AD INSTRUMENTS
S/N : the signal to noise in dB.
Q(QUALITY): the signal quality (%).
S(SIGNAL LEVEL): the signal level (%).
VBER BER measurement of digital signal after error correction.
CBER BER measurement of digital signal before error correction.
C/N out-channel measurement.
POWER, channel power measurement.
Press [◄][►] key to adjust the audio indicator beep sound volume .
3.MOTOR SETTING: Press F2 to activate the DiSEqC1.2 control menu ,
see<Figure2-8>
(a.) MOTOR RESET: Clear the limit of the position, Press OK
(b.) MOTOR INITIAL: Back to the initial position, Press OK on the item.
(c.) COMMAND: Control motor moving west or east, Use [◄][►] key to shift.
Stop option automatically once the signal is
(d.) USAL SETTING: To access the USAL setting menu
4.USAL SETTING: Press OK on the USAL SETTING item,
see <Figure2-9>
<Figure2-8>
DTVLINK
locked.
10