Installing The Haf Filter; Disassembling The Unit To Clean Coils And The Heat Exchange Block; Error Messages - Aramsco Syclone LGR El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installing the HAF filter

To protect your HAF Filter from damage, make sure you insert the filter in the correct orientation.

Disassembling the unit to clean coils and the heat exchange block

WARNING: Unplug unit before servicing.
WARNING: Risk of dust and contaminants exposure. Use of respirator mask and gloves is recommended. If unit has
been exposed to potentially dangerous contaminants, clean thoroughly and sanitize before reuse.
NOTICE: The unit is fitted with sensitive electronic sensors. Protect the sensors and their lead wires from damage and do
not expose them to water or cleaning solution.
Before proceeding, remove pump hose at quick-disconnect.
07-01922C F532-120V 2015-03 Warranty 07-01939
CORRECT.
Filter plies are in
line with direction
of insertion.
Remove
the four
3
in.
8
cover
bolts
shown:
8
INCORRECT.
Filter plies are set
at a right angle to
direction of
insertion.
Subsequent
removal may pull
apart plies and
damage the filter.
Aramsco

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Lgr14553480

Tabla de contenido