1. Introduction 1.1Safety The Dough Divider DMS-30 is simple to operate and easy to clean. Maintenance, cleaning or any other service on the machine must be made only by competent staff. For better safety, read the following instructions to avoid accidents.
1- Firstly read the Technical Table 2- Check if the machine is firm upon a stable surface. Dough Divider model DMS-30 is not recommended for the processing of dough with more than 60% of humidity.
2.2 Pre Operation IMPORTANT Make sure that all the components are properly positioned before using the equipment. Initially check if the Dough Divider is firm on its position. 3. Operation 3.1 Operation Procedure IMPORTANT Do not touch the Blade while it is moving, in any circumstances. 3.1.1 –...
4. General Safety Practices IMPORTANT If any item from the GENERAL SAFETY NOTIONS section is not applicable to your product, please disregard it. The following safety instructions are addressed to both the operator of the machine as well as the person in charge of maintenance. The machine has to be delivered to the operator in perfect conditions of use by the Distributor to the user.
4.1.3 Advices In case of power shortage, immediately turn the machine OFF. Use recommended or equivalent lubricants, oils or greases. Avoid mechanical shocks as they may cause failures or malfunction. Avoid penetration of water, dirt or dust into mechanical or electrical components of the machine.
4.3 Routine Inspection 4.3.1 Advice When checking the tension of the belts or chains, DO NOT introduce your fingers between the belts and the pulleys and nor between the chain and the gears. 4.3.2 Precautions Check if motors and sliding or turning parts of the machine produce abnormal noises.
Maintenance 4.6.1 Danger Any maintenance with the machine in working situation is dangerous. TURN IT OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE. IMPORTANT Always unplug the machine when emergency cases arise. 4.7 Advice Electrical or mechanical maintenance must be done by qualified personal for such operation.
Página 12
INDICE 1. INTRODUCCIÓN 1.1 SEGURIDAD 1.2 COMPONENTES PRINCIPALES 1.3 CARACTERÍSTICAS TÉCNICAS 2. INSTALACIÓN 2.1 INSTALACIÓN 2.2 PRÉ-OPERACIÓN 3.OPERACIÓN 3.1 INSTRUCCIONES DE USO 3.2 LIMPIEZA 4. 4.NOCIONES GENERALES DE SEGURIDAD 4.1PRACTICAS BASICAS DE OPERACIÓN 4.2CUIDADOS Y OBSERVACIONES ANTES DE LIGAR LA MAQUINA 4.3INSPECCIÓN DE RUTINA 4.4OPERACIÓN 4.5DESPUES DE TERMINAR EL TRABAJO...
INTRODUCCIÓN Tabla - 02 1.1 Seguridad Problemas Causas Soluiones Las Divisoras de Masas son maquinas simples de operar y de fácil limpieza. Manutención, limpieza o cualquier otro trabajo en la máquina, solamente * La maquina no dividela * cantidad de masa no esta * Verifique la cantidad de masa.
- SKYMSEN is not responsible for any harm or injury caused by the negligent or inappropriate use of this La Divisora de Masas modelo DMS-30 no es recomendada para el equipment by any operator. This equipment must be operated only by persons whose age equals or exceeds 18 years old, in a safe and sound state of mind, free from the influence of any kind of drugs and alcohol, that received procesamiento de masas con humedad mayor que 60%.
PRÉ-OPERACIÓN 4.2.3 Cuidados IMPORTANTE El cable de alimentación de energía eléctrica de la maquina, debe tener Certifiquese que todos los componentes de la máquina estan una sección suficiente para soportar la potencia eléctrica consumida. puestos en locales correctos antes de utilizarla. Cables eléctricos que estuvieren en el suelo cerca de la maquina, deben ser protegidos para evitar corto circuitos.
4. NOCIONES GENERALES DE SEGURIDAD 4.1.3 Avisos En el caso de falta de energía eléctrica, desligue inmediatamente la llave IMPORTANTE liga/desliga. En el caso de algun item de las NOCIONES GENERALES DE SEGURIDAD no Use solamente aceites lubricantes o grasas recomendadas o ser aplicable en su producto, por favor desconsiderar el mismo.