Warning! :
Even if you use the appliance correctly, some inconveniences or
failures might occur. In the following, you will find a table which lists
the most probable situations and the checks the operator needs to
carry out in order to avoid to call the repair service unnecessarily.
Should the inconvenience persist after having carried out these checks,
immediately turn off the appliance, disconnect it from the mains and
interrupt any output. Call the repair service.
− ... after having pressed
the starting pushbutton,
the white control light
does not switch on and
the
motor
does
start:
− ... after having pressed
the starting pushbutton,
the
white
operation
control light switches
on, but the motor does
not start:
− ... the white operation
control light switches
off and the lid does not
open:
− ... after the opening of
the lid the basket does
not
stand
completely
still.
− ... when pressing the
starting pushbutton, the
lid
safety
device
activated, but the basket
does not turn:
Instruction manual for installation, maintenance and use
Centrifuge DRC 700V
3.6. HOW TO PROCEED, IF ...
− Make sure that the main power switch installed before
the appliance is activated;
Make sure that the lid is closed;
−
Make sure that the emergency button is not activated;
not
−
Turn off the appliance and call the repair service.
−
− Turn off the appliance and call the repair service, as
you need to check the operation of the lid closing lock.
Turn off the appliance and call the repair service.
−
Press the start pushbutton right down.
−
is
DRC700V-GB-00
Page
17 di 21