General Use & Safety Warnings; Before Operating; Technical Assistance - VITO GARDEN VIPRDI Manual De Instrucciones

EN
2. GENERAL USE &
SAFETY WARNINGS
While using this device, several
basic safety precautions must
always be followed in order to reduce the
risk of fire, electric shocks and personal
injuries.
Read and understand the manual
prior to operating this tiller.
Save these instructions and other
documents supplied with this machine
for future reference.
2.1 - GENERAL
These preventive
are essential for your
Use the machine always with care,
in a responsible way and taking into
account that the user is responsible
for any accidents caused to third
parties or their goods.
The machine may only be used by
who have read the instruction manual
and is familiarized with the handling.
Before using it for the first time,
the user must be
by the vendor or other competent
person about the use of the machine
and should obtain
and practical instructions.
This instruction manual in an integral
part of the machine and must be always
provided.
Never allow this machine to be used
by children, people with limited
physical, sensorial
capabilities, with lack of experience
and knowledge of this equipment
and who is not
with the instructions.
This equipment
be operated as
in this instruction manual. No other use
is allowed besides the described.
For safety reasons, any changes other
than the assembly of accessories
authorized
are prohibited. Any changes made void
the warranty.
You can obtain any information about
the authorized accessories through
your VITO official distributor.
2.2 - USING THE BATTERIES
An incorrect use of batteries
can
to the equipment and injury to the user.
For safe handling of the batteries,
note the following safety instructions:
■ Do not throw the batteries into fire;
measures
safety. ■ Do not provoke a short-circuit
with the batteries;
■ Do
non-rechargeable batteries;
■ Check
Spilled acid from batteries can cause
permanent damage to the equipment;
■ Take special care when handling
instructed damaged or acid-leaking batteries.
Wear protective gloves;
appropriate ■ Keep batteries out of children's reach;
Remove
■
the equipment if you do not intend
to use it for a long period of time;

2.3 - BEFORE OPERATING

Check for eventual external damages.
or mental Never attempt to operate the device
if it is damaged or has visible damages.
familiar Avoid installing
in places with constant sun exposure.
must only

2.4 - TECHNICAL ASSISTANCE

described
The device
by the brand's technical service
or by a qualified person, and only
with original spare parts.
by the manufacturer
result in damage
not attempt to recharge
the batteries regularly.
the batteries from
the programmer
should be repaired
3. ASSEMBLY
INSTRUCTIONS
During assembly you
into consideration some
and procedures in order to avoid
accidents, damaging the equipment
and increase its service life:
The programmer
■
be assembled in a vertical position,
with the water inlet facing up;
■ Only use water from the building
water supply network;
■ Avoid folding the device's hose;
■ Do not expose
to low temperatures. Before the first
frost, store it in a dry, ice-free place;
3.1 - PLACING THE BATTERIES
(FIG. B)
1. Hold the device and pull out
the control panel (5);
2. Unscrew the fixing
and remove the battery compartment
(8);
3. Connect the battery
to the correct polarity. Positive pole
(+) of the battery connected to the red
connecting cable pole;
4. Insert the battery into the battery
compartment and tighten the fixing
screws. Ensure that the sealing rubber
is well placed and the screws properly
tightened to prevent water entrance;
5. Attach the control
to the device. Ensure
the connection terminals are properly
placed;
shall take
cares
should
the device
screws
(9)
panel
that
19