Setting The Date And Time; Setting The Watering Modes; Operating Modes; Manual Mode - VITO GARDEN VIPRDI Manual De Instrucciones

EN
3.2 - WATER FILTER
ASSEMBLY (FIG. C)
1. Insert the filter (11) into the water inlet
with the metal mesh facing outwards;
Never use the timer without the
filter;
3.3 – INSTALLING THE TIMER
(FIG. D)
The timer can be installed on faucets
with two different dimensions (1" e ¾").
1. If the tap has a 1" thread, tighten
the thread (1) on the tap;
2. If the tap has a ¾ "thread, tighten
the fitting (2) on the fitting thread.
Turn the connection thread to tighten
the fitting on the tap;
3. Tighten the Hose connecting
accessory (7) to the water outlet;
4. Insert the irrigation
hose quick connector into the hose
connecting accessory;
Tighten the connecting thread
and the connecting accessories
by hand. Do not use tightening tools;
4. OPERATING
INSTRUCTIONS
This device is designed for outdoor
use in gardens to control the operation
of sprinklers and irrigation systems.
This equipment should not be used
with chemicals, food, and flammable
or explosive materials.
You can set the timer to water at any
time of the day. The device starts
and ends the irrigation automatically,
according to the mode of your choice.
4.1 - SETTING THE DATE
AND TIME (FIG. E)
When you turn on
for the first time or
20
you replace the battery, you must set
the current day and time.
1. To set the day, keep the "TIME"
button pressed and press the "DAY"
button until the current day is shown
(12) on the display (3);
MO -
WE - wednesday; TH - thursday;
FR -
SU - sunday;
2. To set the time, keep the "TIME"
button pressed and press "HOUR"
and "MIN" buttons to select the current
time (13);
To make a faster selection
of the day, hour or minute hold
the buttons until you reach the desired
value;
4.2 – OPERATING MODES
(FIG. F)
system's The timer has two operating modes:
manual and automatic.

Manual mode:

1. Press
to activate or deactivate the device.
■ To activate the device set the selection
arrow to "ON" position (14). You will
listen to a "beep" when the device is on;
■ To deactivate set the selection arrow
to "OFF" position (14);

Automatic mode:

2. To select the automatic mode
press the "MAN/AUTO" button until
the selection arrow is in "AUTO"
position (14);
4.3 - SETTING THE WATERING
MODES (FIG. G)
The mode configuration must
always be set when the water
is switched off.
the device
whenever
monday; TU - tuesday;
friday; SA - saturday;
"MAN/AUTO" button
The timer allows selecting 15 days
combinations. In each combination,
it is possible to select eight mode
interruptions.
1. Press the "PROG" button once.
It will show 1 ;
ON
2. Press "HOUR" and "MIN" buttons
to set the beginning time;
(24h configuration timer)
3. Press the "DAY" button to set the day
or combinations of days you want mode
1 to operate;
(The timer considers every days
by default)
4. Press "PROG" button again.
It will show 1 ;
OFF
5. Press the "HOUR" and "MIN" button
to set the stopping time;
6. Press the "DAY" button to set
the day or combinations of days
you want program 1 to stop operating;
7. If you want the timer to turn on once
during the day(s) selected in topic
3, press the "TIME" button to leave
the configuration;
If you intend to add more mode
interruptions to the selected day(s)
at topic 3, or add more days with other
mode interruptions:
8. Press the "PROG" button again.
It will show 2 .
ON
9. Repeat the steps on 2 to 5 topics;
After setting every interruptions
mode:
10. Press the "TIME" button to leave
the configuration;
11. Press the "PROG" button to check
all configurations and make sure that:
In each
■
the operating days are the same
mode,