Cooking Temperature Setting; Setting The Cooking Time - Ndustrio 091FR1ED Manual De Uso E Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

COOKING TEMPERATURE SETTING

This procedure is used to set a temperature thresh-
old at which a buzzer is triggered.
Proceed as follows.
1 - Press the key (C) to start the oil heating phase
and the display (A) will show the cooking tem-
perature.
2 - Press the keys (F-G) to increase or decrease
the values shown on the display (30÷190°C).
3 - Wait about 4 seconds for the new value set to
be saved.

SETTING THE COOKING TIME

Manual cooking
IT
Proceed as follows.
1 - Press the key (D) the last value set appears on
GB
the display (A).
2 - Press the keys (F-G) to increase or decrease
the values shown on the display.
DE
The cooking time increases or decreases by 30
seconds each time one of the keys (F-G) is
FR
pressed.
ES
English
4 - Press the keys (F-G) together and the display
(A) will show the oil temperature in the cooking
well.
During the cooking cycle the value shown
on the display (A) flashes if the temperature
of the oil in the well is less than that set, or
remains constantly on if the temperature is
at or above the set level.
A
C
F
G
3 - Press the key (D) again to start the cooking cy-
cle.
If the (D) key is pressed after the cooking cycle
is started, the display shows the cooking time
set for 4 seconds.
A
F
G
- 10 -
Important
D
IDM-39619400600C.tif
IDM-39619400600E.tif

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

191fr2ed

Tabla de contenido